concrete

Special-purpose program for the design and analysis of prestressed concrete bridges built either segmentally or conventionally. It provides information for geometry and stress control during construction, as well as design values for service load.

Standalone program for analysis and design of post-tensioned slab systems and beam frames: one-way and two-way slabs, flat slabs, slabs with drop panels, waffle slabs, joist slabs, beams (L, T, rectangular, I).

Program for the analysis, design and investigation of new and existing one-way, two-way, waffle slabs, joists, beams and beam frames using the Equivalent frame method. The program produces moment, shear and deflection diagrams and rebar layout.

Advance Concrete is modeling software for structural engineers and detailers seeking a simple to use and completely integrated package in AutoCAD to create all their construction drawings.

Interactive design of reinforced concrete columns. Generates P/M interaction diagram and displays moment magnification factor for slender columns.

Nemetschek Allplan provides object-oriented planning and design software for architects and engineers. It enables users to create architectural and structure models, as well as obtain information on quantities and costs throughout all project phases.

Program for simulation of real behavior of concrete and reinforced concrete structures.

Structural analysis software for steel, concrete, wood, aluminum or composite structures. Design of steel and concrete beams, columns, slabs, membranes, shells.

Design and detailing of reinforced concrete continuous beams.

Legacy software from 19992 to evaluate uniaxial and biaxial strength and deformation characteristics of reinforced concrete (R/C) sections.

Legacy software from 1985 which based upon the finite element method and is particularly suited for the analysis of post-tensioned box girder bridges of constant depth which have arbitrary plan geometry and support conditions.

Digital Canal's Concrete Beam designs one-way flexural members, including beams, one-way slabs and joists. The structural design program includes beam dimensions, bar sizes, quantities, development lengths, cut off locations, stirrup spacing, deflection checks, capacity diagrams and more.

Cross Section Analysis And Design is a powerful application that can perform a wide range of cross section calculations, including the design of reinforced concrete sections.

Design of simple and complex reinforced concrete columns.

Structural engineering, detailing, and drafting software:

Software for static and dynamic analysis of multi-story reinforced concrete buildings (subject or not to seismic action) and for planning the reinforcement with customized style. Fast, reliable and easy to use, supplies executive plans for carpentry ad reinforcement.

Structural Design & Analysis software programs for Architectural - Engineering - Construction (AEC), CAE/CAD, utilities, offshore, industrial, nuclear and civil works facilities.

IDEA Slab is a program for analysis of simple slabs. This application is available in desktop version as well as a free web application. A slab can be of any shape, can contain openings, inner lines or points. Any point or line can be supported. Loads can be uniform, point, line or patch.

Legacy software from 1986 for the transverse inelastic analysis of reinforced concrete highway bridges. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley.

Legacy software from 1986 for the analysis of curved nonprismatic reinforced and prestressed concrete box girder bridges. Source code in FORTRAN and related reports can be downloaded from the earthquake engineering online archive maintained by University of California Berkeley.

LeanWall is a software mainly designed for the purpose of designing a concrete or masonry leaning wall. The wall may lean on rock or soil and may retain soil or other granular material.

Structural engineering analysis software with comprehensive facilities for all types of civil and structural analysis including linear, nonlinear, staged construction, creep, prestress, post tensioning, seismic, blast, buckling, impact, fire and fatigue analysis.

Design of concrete beams, columns and pad foundations.

Design of both reinforced and unreinforced concrete and masonry retaining walls to CP2, BS 8002, BS 8110, IS 325, and BS 5628.

MivneCAD presents а system of calculation based on FEM and designing of BS in the AutoCAD platform. It allows to define stress-strain state of structure at static and dynamic loading and to realize the main design functions.

OpenSees is an open source software framework for structural and geotechnical applications in both sequential and parallel environments. It has been developed in the research community as a means of sharing research ideas and developments via a common software platform.

Analysis, design and drafting of reinforced concrete structures.

Design, detailing and drawing of single foundations pads with arbitrary shapes:

Design and investigation of reinforced concrete column sections. The column section can be rectangular, round or irregular shaped with any reinforcement layout or pattern, and slenderness effects can be considered.

Design of RC columns with arbitrary shapes for combined compression/tension and biaxial bending:

RC-PADD stands for "Reinforced Concrete - Post-Analysis Designer and Detailer". It is a special-purpose program for the structural design of reinforced concrete building structures and the subsequent detailing.

Program for 3D modeling of an reinforced concrete building and generating member drawings. Formwork drawings may present selected elements, their groups, projections of stories and vertical cross-sections of the building.

RcSections is a 32-bit Windows program designed specifically for structural engineers to perform axial-flexural analysis and design of concrete sections (beams, columns or walls) according to ACI 318-05/02 and ACI 318-99.

Real3D-Analysis a powerful frame-finite element analysis and design program built from ground up, with latest technologies from the fields of finite element analysis, numerical computation and computer graphics.

Program to design and check reinforced cantilever walls for soil retention. An automatic geometric pre-design is carried out as well as the section reinforcement and geometric and reinforcement design of the wall foundation.

RetainWall is a software mainly developed for the purpose of designing a concrete or masonry retaining wall. The wall may retain soil or other granular material.

Revit Structure software integrates a multimaterial physical model with an independently editable analytical model for efficient analysis, design, and documentation. Create your own models or import architectural files from AutoCAD Architecture or Revit Architecture.

Legacy software from 1978 for the analysis of curved segmentally erected prestressed concrete box girder bridges, including time dependent effects, so that deflections and stresses can be computed at any stage during the construction or service life of the bridge.

Windows program for slab analysis by the Pieper-Martens method. Reinforced concrete design of slabs according to EC2. 4-way slabs, 3-way slabs, 2-way slabs and cantilever concrete slabs of orthogonal shape. Any ratio of slab sides, any system of continuous slabs.

Fully integrated 3D solution that enables creation and management of complete 3D building models regardless of material or structural complexity. The Tekla Structures solution covers the whole structural design process from conceptual design to detailing, and to construction.

The software directory includes programs, spreadsheets and web applications on
analyses of beams, frames, plates, bridge, design of steel and concrete as well as other related fields.

Tunnel-2H is software for design of Concrete Box Culverts using AutoCAD 2002-2010. A box culvert is a concrete unit with a clear opening of rectangular shapes which may have internal splayed corners. Load combinations are considered at maximum and minimum fill depths.

Frame analysis and design program with integrated concrete beam, concrete column and plate design.