Legacy software from 1989 that utilizes block theory has been applied to the planning and design of surface and underground excavations. Source code in FORTRAN and related reports can be...
DeepXcav is a software for the design of embedded earth retaining walls with limit-equilibrium and advanced nonlinear elasto-plastic analysis methods. DeepXcav offers a one-stop complete...
|US Dollar 2650|
The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans. The full structure can be...
|US Dollar 1200 to 5000|
|GEO5 Earth Pressures||
The program computes basic earth pressures (active, passive pressure, and pressure at rest) acting upon an arbitrary curved structure. Program is a part of a geotechnical software suite GEO5. It...
Modelling of various geotechnical problems by the Finite Element Method.
|GEO5 Masonry Wall||
Verification of reinforced masonry walls. Masonry wall program is a part of a geotechnical software suite GEO5. It is easy to understand and use system comprises individual modules with uniform...
|GEO5 Package Educational||
Fine offers software only at minimal price to cover program administration and maintenance. The price of 10 seats in the network within Educational licence is 900EUR. This price consists of the HW...
|Euro (Depends on number of seats)|
|GEO5 Sheeting Check||
The program is used for the analysis of shallow and deep excavations and retaining structures (anchored, non-anchored cantilever and prop or strut walls) by the method of elastoplastic nonlinear...
|GEO5 Sheeting Design||
Sheeting Design – Design and analysis of sheet piles and other retaining wall types.
|GEO5 Spread Footing||
This program for the design of spread footings subject to general loading. It computes bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear...
A collection of the following geotechnical programs:
(1) MSheet addresses the design of sheet walls including distortions and stability for various excavation phases. The critical length is...
OpenSees is an open source software framework for structural and geotechnical applications in both sequential and parallel environments. It has been developed in the research community as a means...
Plaxis is a family of the following products targeted towards solving geoengineering problems:
Plaxis 2D: Finite element package intended for the two dimensional analysis of deformation and...