Steel Design

Advance Steel was specifically developed for industry professionals that require a comprehensive and completely integrated package in AutoCAD.

Suite of program specifically dedicated to the design of structural steel members, based on the AISC 360 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.

Calculates capacity and stiffness of a connection between steel column and its concrete foundation. Both rolled and welded column sections can be investigated. Handles both embedded connections and connections made using base plate.

Descon Brace is a steel connection design software for Braced Frame type structures. It is a Windows based program with a graphical user interface for defining the input data and for reviewing the design drawing and calculation report.

DesconWin is a software program for designing beam-to-column connections, beam and column splices, and beam to girder connections, of steel buildings. Simple shear connections, and partially or fully restrained moment connections are included in DesconWin. ASD and LRFD versions, both in the U.S.

EBPlate software provides accurate values of elastic critical stresses for a wide field of practical cases of rectangular plates subject to in-plane loading.

Analysis and design of steel buildings. Steel connections design.

Analysis and design of simple and continuous beams and sub frames with up to 16 spans according to BS 5950.

Design of steel connections. High level of user control is supplemented by intelligent automatic design.

Interactive program for comprehensive design of steel sections (I-Sections, Hollow Sections, Angles, Channels, and Tees) according to the BS 5950.

AutoCAD application with a set of tools for accurate detailing of structural steelwork. Suitable for number of tasks ranging from setting-up a general arrangement to the production of fabrication drawings.

Program for the design of steel, aluminium and timber structures; including the design of connections, ties, bracing, etc.

Calculates noncomposite and composite (for modular ratios n and 3n) section properties for steel I-girders with concrete deck. Calculates cumulative stresses at critical locations for loads applied to noncomposite and composite sections.

Training tool for EN 1993-1-1 (EC3), quikEC3 is useful electronic blue book which can calculate properties, section classifications and structural capacities for a wide range of section shapes, using EC3 terminology.

Tool for design of steel beams and composite construction.

Comprehensive program for design of steel connections.

RCAD is a new leading edge solution for the modeling and drafting of steel and concrete structures. RCAD can be used in a variety of situations and, built upon the philosophy of integrated solutions, allows the user to benefit from a truly seamless integration of drafting, analysis and design.

Design of steel structures.

Proportioning of steel cross-sections and members according to the EC3 standard. Evaluation of buckling, lateral buckling, weakening, and slenderness. Program can be run either independently or as a design module of static analysis program.

Design of steel elements with different shapes for axial force, biaxial bending, shear forces and torsion. Section classification, section elastic and plastic design, element design for axial, lateral-torsional and combined buckling:

Calculates fire resistance, in minutes, of steel cross-sections and members according to the EC3 standard. Can evaluate unprotected components and components with fire protection, such coatings, spray coatings or protection tubs.

Web-Based AISC steel design software. Analyze and design continuous beams using LRFD or ASD load combinations.