| Software | Description | Cost | Rating |
| ADAPT-Floor Pro | Program for analysis, design and investigation of slab systems: design of reinforced concrete slab systems; design of post-tensioned slab systems; imp... | Contact the dealer for quote at sales@adaptsoft.com | 
(1 rating) |
| ADAPT-PT | Standalone program for analysis and design of post-tensioned slab systems and beam frames: one-way and two-way slabs, flat slabs, slabs with drop pane... | Contact the dealer for quote at sales@adaptsoft.com | |
| ADAPT-RC | Program for the analysis, design and investigation of new and existing one-way, two-way, waffle slabs, joists, beams and beam frames using the Equival... | US Dollars 500 (Standard, until Dec. 31, 2009) | |
| Advance Concrete | Advance Concrete is modeling software for structural engineers and detailers seeking a simple to use and completely integrated package in AutoCAD to c... | Euro 6300 | |
| Advanced Column Program | Interactive design of reinforced concrete columns. Generates P/M interaction diagram and displays moment magnification factor for slender columns. | US Dollars 700 | |
| AFHTech Reinforced Concrete Beam and Column Design | Online and mobile device applications for the design of reinforced concrete columns and beams. | | |
| ATENA | Program for simulation of real behavior of concrete and reinforced concrete structures. | | 
(3 ratings) |
| BEAMD | Integrated solution for RC beam design, detailing, drafting and scheduling. | | |
| Biaxialer | Analysis of reinforced concrete cross-sections of arbitrary geometry. | US Dollars 395 | |
| COBRAS (Concrete Bridge Assessment) | Yield-line analysis software for assessing the ultimate load capacity of concrete structures, particularly concrete bridge decks. Successfully used to... | UK Pound Sterling 2850 | |
| Concise Beam | Concise Beam is an easy to use Microsoft Windows based program for the design of precast concrete beams. Concise Beam will perform a load analysis and... | US Dollars 1600 | |
| Concrete Design | Digital Canal's Concrete Beam designs one-way flexural members, including beams, one-way slabs and joists. The structural design program includes be... | US Dollars 495 | |
| CRSI Retaining Wall Program | Interactive design of reinforced concrete retaining walls. | US Dollars 395 | |
| CSI COL | Design of simple and complex reinforced concrete columns. | | |
| CSI Detailer | Detailing of reinforced concrete structures. | | |
| Development and Lap Splice Lengths | Calculation of development and lap splice lengths for reinforcing bars. Incorporates ACI 318-95 Building Code Requirements for Structural Concrete and... | US Dollars 60 | |
| EDISIS 2000 | Software for static and dynamic analysis of multi-storey reinforced concrete buildings (subject or not to seismic action) and for planning the reinfor... | Euro 2500 | |
| GaLa Reinforcement | Advanced analysis and design of reinforced concrete elements (columns, beams, shear walls) subjected to axial forces and axial or biaxial (Mx and My) ... | US Dollars 300 | 
(1 rating) |
| MasterBeam Composite SlimFloor | Design of concrete slabs supported by metal decking or precast concrete units. | | |
| MasterBeam Concrete Beam Designer | Analysis, design and scheduling of continuous beams and sub frames with up to 16 spans. | | |
| MasterKey Concrete Design | Design of concrete beams, columns and pad foundations. | | |
| MasterRC | AutoCAD application with a set of tools for accurate detailing of reinforced concrete. Automatic generation of bars and labels requires minimal user i... | | |
| MasterSeries Pile Cap Designer | Analysis, design, detailing and scheduling of regularly shaped pile caps for 1 to 9 piles. | | |
| MivneCAD | MivneCAD presents а system of calculation based on FEM and designing of BS in the AutoCAD platform. It allows to define stress-strain state of s... | US Dollars 5300 |
(1 rating) |
| MultiRebar | Fully integrated rebar detailing and scheduling for AutoCad. | | |
| Orion | Analysis, design and drafting of reinforced concrete structures. | |
(1 rating) |
| pcaColumn | Design and investigation of reinforced concrete column sections. The column section can be rectangular, round or irregular shaped with any reinforceme... | | |
| PGSplice | Spliced precast-prestressed concrete girder analysis software. | Free on WWW | |
| PGSuper | Precast-Prestressed Girder design and analysis software. | Free on WWW | |
| PSBeam | Design of precast, prestressed concrete bridge girdes. | US Dollars 2995 | 
(1 rating) |
| QuickConcreteWall | Design and checks of reinforced concrete shear walls. | | |
| RC-PADD | RC-PADD stands for "Reinforced Concrete - Post-Analysis Designer and Detailer". It is a special-purpose program for the structural design of reinforce... | | |
| RCAD Formwork Drawings | Program for 3D modeling of an reinforced concrete building and generating member drawings. Formwork drawings may present selected elements, their grou... | | |
| RCAD Reinforcement | RCAD is a new leading edge solution for the modeling and drafting of steel and concrete structures. RCAD can be used in a variety of situations and, b... | | |
| RcSections | RcSections is a 32-bit Windows program designed specifically for structural engineers to perform axial-flexural analysis and design of concrete sectio... | US Dollars 1500 | |
| Rebar Development and Splice Length | Calculate required development and splice lengths for tension, hooked and compression splices according to ACI 318. | Free | |
| RMCalc | Calculation of restraint moments in precast prestressed concrete girder bridges constructed with continuous spans. | Free on WWW | |
| Sigma-X Post Tension Floor | Sigma-X Post Tension Floor is based on equivalent frame method and enables to model any shaped slab, supporting walls and columns and any number of vo... | | |
| Slab Bridge Designer | Design of cast-in-place steel reinforced concrete slabs according to AASHTO LFD and LRFD. | US Dollars 350 | |
| SOLAIO 2000 | Analysis and design of floor slabs made of reinforced and prestressed concrete. | | |
| VisualFoundation | VisualFoundation automates much of your work involved in designing complex mat footings. All you need to do is specify the locations, sizes, materials... | US Dollars 790 and up depending on license | |
RSS Feeds |
Sitemap |
About |
Contact Us |
Advertising |
Partners |
Links Directory
Arabic
Chinese
Czech
Dutch
English
French
German
Greek
Italian
Japanese
Korean
Polish
Portuguese
Russian
Spanish